Posted by Phyllis on Sunday, 23 October 2005, at 11:41 a.m.:
In Reply to: uneven weft posted by jacqueline craven on Saturday, 22 October 2005, at 11:52 a.m.:
I'm thinking your problem may be a couple of things. It could be that your beater bar is not straight...it could be warped or needing an adjustment. It could also be that the warp threads are not evenly tensioned....the left side could be a little tighter than the right. You may cut your warp threads and retie them to the front apron bar. Sometimes new weavers forget to hold the beater bar in the middle, but since you are not "new" I'm sure this is not the problem. Hope this helps a little. Phyllis of Tennessee